Buyers speccing batteries for automated guided vehicles and electric forklifts usually meet the chemistry question early: lithium iron phosphate (LiFePO4) or ternary lithium (NMC)? Brochure answers are useless here — both chemistries are "high performance" in every brochure ever printed. The useful comparison is narrower and more practical: put the specification tables of real models side by side and ask which numbers your duty cycle actually spends. Both chemistries are built in the same duty classes, which makes the comparison concrete.
Cycle life is where the chemistries separate
An AGV or forklift battery is cycled daily, often more than daily, so cycle life is the figure that decides lifetime cost. The LiFePO4 models in the industrial families are rated in the thousands: the 48V 40Ah AGV battery and the 48V 450Ah forklift system are rated 3000+, and the 48V 250Ah forklift system ≥2000 under stated conditions (0.5C/1C, 80% depth of discharge). The ternary entrant at the same bus voltage — the 48V 52Ah pack — is rated at ≥500 cycles. That is not a small gap. At one full cycle per working day, 3000 cycles is roughly a decade of service; 500 cycles is roughly two years. Unless the vehicle itself will be replaced sooner, the LiFePO4 pack is the cheaper battery over the vehicle's life even when its purchase price is higher, and it is not close.
Energy density is where ternary answers back
The ternary 48V 52Ah pack earns its place on a different line of the table: about 2.5kWh in a 150×220×300mm case at about 13.5kg — roughly 185Wh per kilogram, built with a fixed bracket, epoxy board and PVC. The LiFePO4 48V 40Ah AGV model, for comparison, stores about 1.92kWh at about 25kg — roughly 77Wh per kilogram in its sheet-metal fleet case. For a compact vehicle where the battery box is fixed by the design and every kilogram of ballast matters, the ternary pack's density is a genuine engineering argument, not a marketing one. Read the envelope lines before the chemistry lines: on many vehicles the case decides first. The same pattern repeats at module scale: the ternary family's 3.7V parallel module is a 66.6Wh building block no LiFePO4 catalogue line matches at that granularity.
Temperature behaviour
Neither chemistry in the industrial families is a low-temperature specialist by default — the −40°C discharge ratings live in the dedicated low-temperature family and on one AGV model: the 24V 60Ah cold-storage battery, rated to discharge at −40~60°C and to charge from −20°C, with ≥1000 cycles. Where cold and cycling combine, the answer in this range is a model specified for the cold store rather than a chemistry slogan. The forklift systems state no temperature window at all — adequate for heated warehouses, and a reminder to check the window against the actual site, in the enquiry, rather than assume one.
Current, communication and integration
On current delivery the LiFePO4 industrial models run away with it: 250A continuous and 600A peak with a 12kW load rating on the 450Ah forklift system, against ≤40A continuous and ≤120A pulse with a ≤1920W load cap on the ternary 48V pack. The AGV battery sits between: 40A continuous, 120A pulse, 1.8kW maximum output. On integration the industrial LiFePO4 models also carry the richer data: RS-485 with host-computer software on the AGV battery, CAN plus RS-485 with protocol on the 450Ah system, and CAN provided for PLC reading with state-of-charge accuracy of ≤5% on the 250Ah system. For a fleet managed from a host system, those lines matter as much as the chemistry does, and they currently sit on the LiFePO4 side of this range.
Charging the fleet is part of the chemistry decision
A battery is only as available as its charging plan. The matched chargers in this range sit with specific batteries: a 54.0V 18A unit for the 48V AGV battery and a 29.4V 20A unit for the 24V cold-storage battery. The forklift systems carry charge pairs instead of matched units — 50A standard and 120A maximum on the 450Ah system, 50A standard and 100A maximum on the 250Ah — so opportunity charging during breaks is a designed mode, not an improvisation, on both. The ceilings differ by chemistry and model (54.6V-class for the ternary 48V pack, the forklift systems' own charge specification on theirs), and the two never share a charger. When comparing chemistries, compare the whole loop — pack, charger, charge window — because the fleet feels the weakest link.
What the tables do not decide
Two things sit outside the chemistry comparison entirely. The first is handling: the 450Ah forklift system weighs about 280kg and the 250Ah system about 115kg — these are crane-and-forklift installations, planned like machinery, not battery swaps — while the AGV pack at 25kg and the cold-storage pack at 13.5kg are one- or two-person lifts. The second is service model: a fleet that swaps packs between vehicles cares about case and connector standardisation across the fleet, which argues for standardising on one family — and one chemistry — even where a mixed fleet might win a single vehicle's comparison. Decide the fleet policy first; the per-vehicle chemistry choice usually follows from it.
The two forklift systems read side by side
The catalogue's forklift family is two systems, set out side by side. The 450Ah system: 48V class, about 21.6kWh, 12kW maximum load, 250A continuous and 600A peak discharge, 50A standard and 120A maximum charge, CAN plus RS-485, a 350A Anderson connector, 3000+ cycles, about 280kg in a 708×673×970mm case. The 250Ah system: about 12kWh, 4kW maximum load, 100A maximum discharge, 50A standard and 100A maximum charge, CAN for PLC reading with SOC accuracy ≤5%, IP53, ≥2000 cycles under stated conditions, about 115kg in a 170×500×800/850mm case. The differences are a ladder, not a contest: energy nearly doubles, load rating triples, mass grows by 165kg, and the integration shape changes from machine-facing (PLC, SOC accuracy, a BMS schematic on the model page) to truck-facing (connector, ballast, fleet comms). The selection between them is made by two measurements from the vehicle's actual duty — the shift's energy consumption and the load requirement — plus the integration the vehicle offers.
Lifetime throughput: the arithmetic that settles most arguments
Cycle life becomes money when it is multiplied by capacity. Lifetime energy throughput — nameplate energy times cycle rating — is the figure of merit a fleet actually buys. Run it across the catalogue. The 450Ah forklift system: 21.6kWh × 3000 cycles is about 64.8 megawatt-hours of work across its life. The 250Ah system: 12kWh × 2000 is 24MWh. The AGV 40Ah pack: about 1.92kWh × 3000 is 5.76MWh. The ternary 48V 52Ah pack: about 2.5kWh × 500 is 1.25MWh — a fifth of the AGV pack's lifetime work from a larger nameplate, which is this comparison's whole thesis in one line. The 12.8V 200Ah service battery: 2.56kWh × 3000 is 7.68MWh. The polymer 12V 100Ah pack: 1.2kWh × 500 is 0.6MWh. Against these, depth of discharge is the operator's lever: a pack cycled at half depth typically outlasts its full-depth rating, so the fleet that buys one size up and cycles shallow is buying throughput at a discount the brochure never prints. When a ternary pack wins a tender on price per kilowatt-hour and loses on price per megawatt-hour of lifetime, this multiplication is what happened — run it before the tender, not after the replacements.
Where ternary wins inside this range, model by model
Fairness to the ternary side requires naming its wins concretely. The 48V 52Ah pack wins on density: about 185Wh per kilogram against the AGV LiFePO4 pack's 77, in a bracket-mounted case a vehicle designer can place where a 25kg steel box will not go. The two-wheeler series wins on energy at vehicle scale: a twelve-model ternary line in iron cases from 22Ah to 55Ah across 48V, 60V and 72V, a shape of catalogue the LiFePO4 side does not attempt. The module family wins on granularity: a 3.7V 18Ah block, combined in parallel to order, is a building block for builders whose geometry is their own. And the shop's 18650 packs win on finish: a 7.4V and an 11.1V-class pack with the protection board already built in and 800 cycles, for devices that want a battery rather than a project. Each win is real, each is bounded, and each is about shape, mass or granularity — none is about cycle life, temperature depth or continuous current, which is the balanced statement of the comparison.
The fleet numbers on one page
Forklift system, large: 48V class, 450Ah, about 21.6kWh, load 12kW, 250A continuous, 600A peak, charge 50A standard and 120A maximum, CAN + RS-485, 350A Anderson, 3000+ cycles, about 280kg, 708×673×970mm; lifetime throughput about 64.8MWh. Forklift system, standard: 250Ah, about 12kWh, 4kW, 100A maximum discharge, charge 50A standard and 100A maximum, CAN for PLC with SOC ≤5%, ≥2000 cycles, about 115kg; throughput 24MWh. AGV pack: 48V, 40Ah, about 1.92kWh, 40A continuous, 120A pulse, charge 20A suggested and 40A maximum, RS-485, 3000+ cycles, about 25kg, 165×265×425mm; throughput about 5.76MWh. Cold-storage AGV pack: 24V, 60Ah, 40A continuous, 120A pulse, ≥1000 cycles, discharge to −40°C, charge from −20°C. Ternary 48V pack: 52Ah, about 2.5kWh, ≤40A continuous, ≤120A pulse, charge ≤20A, ≥500 cycles, about 13.5kg; throughput about 1.25MWh. Service battery: 12.8V, 200Ah, 2.56kWh, 200A continuous, 450A peak, 3000+ cycles; throughput 7.68MWh. Read down the throughput column and the comparison's conclusion reads itself: the chemistries are priced in different currencies, and the fleet is paid in megawatt-hours.
So which one, for which vehicle?
For forklifts and warehouse AGVs on daily cycles, the evidence points one way: LiFePO4, for cycle life several times the ternary rating, with communication and high-current headroom already specified. For compact vehicles and devices where envelope and weight are hard constraints and the duty cycle is lighter, the ternary pack's density is a fair trade against its shorter cycle rating. For cold stores, the question is not chemistry but the model specified for the duty — the cold-storage AGV battery carries the windows the freezer needs. The mistake to avoid is choosing by chemistry label alone. Choose by the table: cycle life against your shift pattern, envelope against your battery box, discharge window against your coldest room, and communication against your fleet software. The models cited here carry every one of those lines — hold any alternative quote to the same standard. The last word: choose by the constraint that binds first — envelope, temperature, cycle economics, infrastructure — and let the chemistry follow.
The two-wheeler evidence: ternary at vehicle scale
The comparison so far has been fought in the industrial families, but the range's largest ternary commitment is elsewhere: a twelve-model two-wheeler series, ternary cells in iron cases, ≥800 cycles, a ≤800W power ceiling, spanning 48V (22, 32, 45 and 55Ah), 60V (22, 32, 40, 45Ah and a 45Ah high-temperature variant) and 72V (22, 32 and 40Ah). Its example rows come with range figures — about 50km for the 48V 22Ah model, about 55km for the 60V 22Ah, about 60km for the 72V 22Ah — and with charger pairing by each model's own range top (58.8V, 71.4V, 84.0V), not by generic classes. Read the series as the ternary thesis at its strongest: many capacities, three voltages, energy density doing the work, cycle life adequate to a consumer vehicle's calendar rather than an industrial fleet's. An AGV buyer should not import its conclusions — the duties share nothing but wheels — but a buyer speccing both vehicle classes in one programme should notice that the same manufacturer reaches for different chemistries in the two places, and ask why. This article is the why.
The service-battery evidence: LiFePO4 below the industrial floor
At the small end, the LiFePO4 side fields the 12.8V 200Ah service battery: 2.56kWh, 200A continuous and 450A peak discharge, a 100A standard / 200A maximum charge pair, 3000-plus cycles, Bluetooth and RS-485 options, and series/parallel extension to a maximum of 8 in series. It matters to this comparison because it breaks the lazy version of the density argument: at 522×238×218/222mm and about 23kg it is not a light battery, yet for vehicle auxiliary, RV, cabin and small-storage duty its owners choose it anyway — for the cycle rating, the current headroom and the extension path, in that order. The pattern generalises: wherever the duty is daily and deep, buyers keep landing on the iron-phosphate side even when the ternary side is lighter, and wherever the duty is compact, intermittent or shape-bound, they land on ternary. The chemistries are not rivals; the duties are different, and the tables say so.
The small-pack evidence: polymer and 18650
Two more ternary-family exhibits complete the evidence base. The polymer family carries two packs — 14.8V 10Ah and 12V 100Ah — both rated at 500 cycles, both specified around their protection thresholds, serving instruments, monitoring, medical devices, lighting and auxiliary power: duties where the pack is a component inside a product, its calendar measured in product lifetimes, its 500 cycles spent across years. The shop's 18650 packs carry 800 cycles — a 7.4V 6000mAh pack and a 10.8V/11.1V 10.5Ah pack, protection boards built in, certification claims stated — serving devices on the same logic at a longer rating. Set the three small-pack figures (500, 500, 800) against the industrial LiFePO4 figures (2000, 3000, 3000) and the comparison's shape is unmistakable: it is not a gap that narrows with cleverness, it is a design centre. Ternary small packs are built to be adequate and compact; industrial iron-phosphate is built to be cycled forever by comparison. Choose the design centre that matches the duty and the argument ends.
Charging infrastructure: the comparison's hidden third column
Every chemistry decision is also a charger decision, and the catalogue's charger line makes the infrastructure column concrete. Ternary 48V-class packs charge in the 54.6V class — aluminium models at 2A and 4A, a plastic model at 2A — small, cheap, bench-scale units for packs with ≤20A limits. The LiFePO4 storage class charges toward 57.6V ceilings, the forklift systems carry their own 50A-standard charge specifications with maxima of 100A and 120A, and the AGV battery has a 54.0V 18A matched unit. Infrastructure cost follows the same gradient as cycle life: the ternary side's chargers are accessories, the iron-phosphate side's are installations. A fleet comparison that prices only batteries understates the iron-phosphate programme's capital and overstates nothing else — the honest total-cost table has three columns (packs, chargers and circuits, replacements across the vehicle's life), and the third column is where the cycle ratings come back to collect their debt or pay their dividend.
A decision worksheet
Reduce the article to the five questions that actually decide. One: what is the vehicle's daily cycle count, honestly counted — above one deep cycle a day, the iron-phosphate cycle ratings dominate the economics. Two: what is the battery box — fixed and generous, or designed around a ternary pack's density (about 185Wh/kg against about 77Wh/kg in the worked examples)? Three: what is the coldest room, and does any candidate carry a discharge window that covers it — remembering that in this range the answer is a specific cold-storage model, not a chemistry. Four: who reads the battery — nobody, a display, a fleet host (RS-485 with host software), or a machine controller (CAN, PLC, a ≤5% SOC figure)? Five: what is the peak current, and does the candidate carry continuous and pulse figures that cover it with margin? Score any two candidate packs against those five, in writing, and the chemistry question answers itself as a by-product — which is what a specification process is for.
Reading the AGV page the way its author wrote it
Work through the 48V 40Ah AGV battery's figures as a worked example of the worksheet in action. Cells: 26650-format, 3.2V 3300mAh, arranged 15S13P — a build a buyer can sanity-check (fifteen for the voltage, thirteen for the capacity, 195 cells). Currents: 40A continuous, 120A pulse, maximum output 1.8kW — the pulse is three times the continuous figure, the signature of start-stop duty. Charge: 20A suggested, 40A maximum, with a matched charger at 54.0V 18A and a three-hour turnaround — the rotation unit of the fleet plan. Conversation: RS-485 with host-computer software and protocol. Endurance: 3000-plus cycles, a 12-month warranty. Body: black sheet-metal case with baked paint, 165×265×425mm, about 25kg, internal resistance ≤80mΩ. Not one of those lines is decorative; each answers a worksheet question, and a competing quote missing three of them is not cheaper — it is less specified, which is a different thing that eventually costs more.
Reading the 450Ah page the same way
The larger forklift system rewards the same reading at the other scale. Cells: 26650-format 3.2V 3.3Ah in a 16S135P build — 2,160 cells, the deep-parallel philosophy. Currents: 250A continuous, 600A peak, a 12kW maximum load, through a 350A Anderson connector whose rating the continuous figure respects. Charge: 50A standard, 120A maximum — the opportunity-charging pair. Conversation: CAN plus RS-485 with protocol. Endurance: 3000-plus cycles inside a 12-month warranty. Body: 3mm black painted sheet metal, 708×673×970mm, about 280kg — ballast as well as battery, in a machine whose stability arithmetic includes it. The worksheet questions scale without changing: cycles against the shift count, box against the compartment, window against the building, conversation against the fleet software, current against the duty's peaks.
Warranty lines: the quiet comparison
One column rarely compared across families is the warranty term, and it carries information. The industrial LiFePO4 systems carry 12 months. The AGV battery carries 12 months. The storage family's wall unit carries 36 months. Read those terms as duty statements rather than generosity rankings: the storage unit lives a sheltered indoor life at gentle rates and its maker prices that shelter into the term; the industrial batteries live in machines, at high currents, in working buildings, and their maker prices that too. A ternary pack's warranty, where one exists, belongs in the same reading — the term a manufacturer offers on a 500-cycle product tells you how the maker expects the calendar and the cycles to race. None of this decides a purchase alone, but a comparison that omits the column is missing the manufacturer's own risk assessment of its product, which is the one expert opinion in the room that has money behind it.
When neither chemistry's catalogue page fits
Some duties fall between the range's shapes: the vehicle whose box is ternary-sized but whose calendar is iron-phosphate long, the machine that needs a conversation tier its family's packs do not offer. The catalogue's answer is the custom route, and this comparison supplies its brief: the worksheet's five answers, stated numerically, with the nearest model named as the starting point. A custom specification that begins "like the 450Ah system, in this envelope, with this protocol" is a shorter and safer document than one written from a blank page, because every unstated line inherits a known answer. The chemistries frame that conversation rather than ending it — the custom route can build in either — but the duty decides there exactly as it decides here, which is the whole of the law this article has been preaching.
The cold-store verdict, revisited in detail
The worksheet's coldest exhibit deserves its own cross-examination, because it is where the chemistry framing fully dissolves. The 24V 60Ah cold-storage battery: 3.7V 5Ah cells in a 7S12P build — a ternary-class cell voltage, note, in the range's most extreme temperature case. Discharge −40~60°C, charge from −20°C, 40A continuous, 120A pulse, RS-485 with protocol, ≥1000 cycles, 120×310×330mm, about 13.5kg, and a matched charger at 29.4V 20A. Its cycle figure sits between the industrial LiFePO4 thousands and the ternary 500; its temperature window beats every LiFePO4 model in the range; its currents are fleet-grade. No chemistry slogan predicts that combination — a model specified for a duty does. The lesson for the comparison is not that chemistry does not matter, but that it matters third: after the duty's temperature and the duty's calendar, both of which are properties of the building and the shift pattern, not of the periodic table.
Density versus ballast: the forklift exception
One industrial duty inverts the density argument entirely. A counterbalance forklift needs mass low in the chassis — its battery is ballast as well as energy — so the 450Ah system's roughly 280kg is partly a feature, and a hypothetical featherweight pack of the same energy would oblige the machine's maker to add dead weight elsewhere. The 250Ah system's roughly 115kg carries the same double duty at its scale. This is why the comparison's Wh/kg column, decisive in a handheld device and persuasive in a two-wheeler, must be read with the machine's stability arithmetic in the room: for counterbalanced trucks, energy per kilogram is a number to check, not a number to maximise. The AGV sits between the worlds — its 25kg pack is structure and supply at once, on a vehicle whose centre of gravity was designed around it. Density is a property; suitability is a relationship. The worksheet asks about relationships.
Total cost over ten years, worked in the open
Put the throughput arithmetic on a calendar and the comparison stops being abstract. A forklift on one deep cycle per working day, 250 days a year, spends 250 cycles annually: the 450Ah system's 3000-cycle rating is a twelve-year supply of cycles; the 250Ah system's ≥2000 is eight years; a hypothetical ternary pack at 500 cycles is two years — five purchases across the decade, plus five rounds of fitting, downtime and disposal, against the iron-phosphate system's one or two. An AGV on two cycles a day spends 500 annually: the 40Ah pack's 3000 cycles are six years; the cold-store pack's ≥1000, at its harsher rotation duty, is the planned-consumable pattern its page prices honestly. A device on a weekly cycle spends 52 annually, and its 500-cycle polymer pack is a decade — the same rating that fails the forklift passes the instrument with years to spare. Ten-year cost is cycle rating divided by annual cycles, multiplied by everything a replacement involves; the chemistry debate is that division, done or not done.
The protocol column, compared properly
The comparison's last column is the one brochures print smallest. The AGV battery: RS-485 with host-computer software and protocol — a fleet conversation, polled from a host, suited to vehicles that report to a management system. The 450Ah forklift system: CAN plus RS-485 — both conversations, fleet and machine. The 250Ah system: CAN provided for PLC reading, with state-of-charge accuracy of ≤5% and a BMS schematic with the model — a machine-integration document aimed at builders. The ternary 48V pack: no communication line — a silent component, entirely proper for a bracket-mounted pack in a simple machine, and a hard boundary for a fleet that manages by data. None of these is a chemistry property; all of them are purchasable only at the model level, in writing, before the order. A fleet standardising on data should standardise the protocol column first and let it veto models the chemistry column would have waved through.
A note on names: 48V is a class, not a voltage
The comparison has used "48V" throughout as the industry's class nickname, and a closing precision is owed. The actual nominal voltages differ by chemistry and maker: the storage family's flagship is a 51.2V-nominal unit whose title carries the 48V class name while its specification block governs — 51.2V nominal, a 57.6–44.8V working range. The ternary 48V pack works across 54.6–39.0V. The forklift systems carry their own charge specifications rather than a shared ceiling. None of this is pedantry: chargers, inverters and cut-offs are set from ranges, not nicknames, and the single most common integration error in this voltage class is a charger chosen by the class name and set by assumption. One rule governs: the spec block governs, titles are conversation. Buyers should hold every document in the comparison to it: where a title and a table disagree, the table is the product.
The destination-market column
A comparison destined for an export programme has one more column, and it is documentary rather than electrical. Industrial batteries cross borders as dangerous goods: the company lists UN38.3, the transport test regime, among its product certifications, alongside its management-system certifications — and the buyer's side of that regime is a file, assembled at order time, containing the test summary for the specific models ordered and the shipping classification the freight forwarder works from. Market access adds its own layer per destination, and the professional habit is identical to the electrical one: documents requested as documents, matched to model numbers, filed with the quotation rather than chased after the vessel sails. Fleets that treat the paper column with the same seriousness as the cycle column discover that the two fail in the same way when neglected — late, expensively, and in front of an audience.