Home › Lithium Battery Chargers
Charger family
Lithium Battery Chargers
The charger line runs to 38 models in two shell classes: an aluminium-shell series (220Vac input in selected models, efficiency of 85% or better, red/green charge LED, 1.5m input and 1.0m output cords) covering 12.6V to 84.0V outputs at up to 40A and 864W, and a compact plastic-shell series for smaller packs. Three further chargers are the matched units for specific batteries. Classes are grouped by output voltage below.
Key data — Lithium Battery Charger Manufacturer
| Aluminium series | 12.6V–84.0V outputs; up to 40A / 864W; ≥85% efficiency; LED indicator |
|---|---|
| Plastic series | 4.2V–54.6V outputs; compact units to 8A |
| Input (aluminium series) | AC 220V, 50–60Hz in selected models |
| Cords (aluminium series) | 1.5m input / 1.0m output |
| Matched chargers | With specific batteries: 54.0V 18A, 29.4V 20A, 12.6V 8A |
Charger classes
48V class
54.6V and 57.6V outputs, 2A–15A, to 864W.
12V class
12.6V outputs to 20A, plus 14.6V LiFePO4-side models at 25A and 40A.
24V class
29.4V outputs to 20A in aluminium and plastic shells, plus a 33.6V model.
36V class
42.0V outputs at 2A, 5A and 15A, plus a 43.2V 10A model — that model's own ceiling.
60V / 72V class
67.2V 10A (672W) and 84.0V 10A (840W) aluminium-shell models.
Compact chargers
4.2V to 21V plastic-shell units for small packs, and the 9V set charger.
Forklift battery chargers
Forklift duty starts from the battery side. No standalone model in this line is a forklift charger; what the range carries for forklifts is the systems' own charge specification — 50A standard with 120A maximum on the 48V 450Ah system, 50A standard with 100A maximum on the 48V 250Ah system — and the high-current end of this charger line (the 57.6V 15A / 864W aluminium model and the 20A, 25A and 40A classes) is where heavy-vehicle charge currents live. Send the battery voltage, capacity and shift pattern with the enquiry; the charger is matched to the system's charge pair, not sold as a generic "forklift charger".
AGV battery chargers
Two AGV batteries come with matched chargers of their own: a 54.0V 18A unit matched to the 48V 40Ah AGV battery (972W, about a three-hour charge) and a 29.4V 20A unit matched to the 24V 60Ah cold-storage battery. The standalone chargers group into the 24V and 48V classes around those systems. A third matched unit, a 12.6V 8A charger, is supplied with the portable 12V 80Ah battery.
Reading a charger specification
Three numbers decide a match: output voltage (the charge voltage of the pack, e.g. 54.6V for a 48V ternary pack or the 57.6V class for 48V-class LiFePO4 systems), output current (charge time and heat), and the pack's own charge limit — the battery's maximum charge current always governs. Each class gives its models' outputs, currents, power, case size and weight.