Home › LiFePO4 Battery Packs
LiFePO4 power family
LiFePO4 Battery Packs
Lithium iron phosphate is the workhorse chemistry of this catalogue: the family runs from 3.2V cells through 12V, 24V and 48V packs to 96V, sized for power, storage, RV and vehicle duty. The anchor model — a 12.8V 200Ah power battery — carries 200A continuous discharge, a 450A peak and 3000+ cycle life; the capacities group by voltage so buyers can compare like with like.
Key data — LiFePO4 Battery Packs
| Chemistry | Lithium iron phosphate (LiFePO4) |
|---|---|
| Range | 3.2V cells; 6.4V–96V packs |
| Anchor model | 12.8V 200Ah — 200A continuous, 3000+ cycles |
| Storage branch | 51.2V wall / rack systems (Energy Storage family) |
Why LiFePO4 for power duty
The figures explain the fit: high continuous current (200A on the 200Ah model, against a 100A standard / 200A maximum charge), long cycle life, and a −20~60°C discharge window. The 200Ah model also supports series and parallel extension (up to 8S), with Bluetooth app monitoring and RS-485 offered as options.
In this family
12.8V 200Ah power battery
200A continuous, 450A peak, 3000+ cycles.
12V range
90Ah to 250Ah capacities for vehicle, RV and backup duty.
12V 100Ah point
The most-requested 12V capacity point in the range.
24V range
Including the 24V 300Ah and 100Ah storage models.
48V range
Headed by the 48V 50Ah pack; chemistry-specific guidance included.
3.2V cells
The cell format the storage range is built from, incl. the 3.2V 100Ah cell.
RV batteries
The 200Ah anchor model applied to RV and home-storage duty.
Selecting inside the LiFePO4 family
Start from the bus voltage, then the current. The 12V class carries the vehicle and RV duties, headed by the 200Ah model whose 200A continuous rating is the family's current ceiling at that voltage. The 24V class serves storage and light traction in two capacities. The 48V class divides by duty: this family's 50Ah pack for general service, the AGV family's 40Ah communication model for managed fleets, and the forklift systems at 250Ah and 450Ah for trucks. Cells (3.2V) are the route only for buyers building their own packs. Every route ends at the same check: continuous current, charge current and cycle expectation against the model's table.