English

Home › Forklift Lithium Battery Systems

Forklift family

Forklift Lithium Battery Systems

Two 48V systems anchor this family: a 450Ah system rated 250A continuous and 12kW maximum load, built for electric forklifts, tractors, stackers and flatbed vehicles; and a 250Ah system built around machine integration, with a CAN protocol provided for PLC reading and SOC accuracy of ≤5%. Both are LiFePO4.

Illustration of a forklift lifting a battery unit

Key data — Forklift Lithium Battery Systems

Systems48V 450Ah (250A cont. / 600A peak, 12kW); 48V 250Ah (100A max, 4kW)
CommunicationCAN + RS-485 (450Ah); CAN for PLC, SOC ≤5% (250Ah)
Connector350A Anderson (450Ah system)

Models

Charging heavy systems

Charging is specified from the batteries' own charge pairs: 50A standard with 120A maximum on the 450Ah system, 50A standard with 100A maximum on the 250Ah system — the figures that make break-time opportunity charging a designed mode. Neither forklift system has a matched charger; charger selection is made against the charge pair and the shift pattern at enquiry. State the vehicle's duty cycle with the enquiry so charge current and charger count are sized with the battery.

Selecting inside the forklift family

Both systems share the selection sequence. Truck duty first: the load figure (12kW or 4kW) must cover the vehicle's work, and no capacity choice compensates for an undersized load rating. Shift energy second: the 250Ah system's roughly 12kWh against the 450Ah's roughly 21.6kWh, set against measured per-shift consumption with opportunity charging counted honestly. Integration third: the 450Ah system is a roughly 280kg counterweight-class installation with a 350A Anderson connection and CAN plus RS-485; the 250Ah system is a roughly 115kg machine battery whose CAN protocol a PLC reads natively. Chemistry is not a decision the family asks the buyer to make — both systems are LiFePO4.

Related pages