English

Home › Low-Temperature Lithium Batteries

Low-temperature family

Low-Temperature Lithium Batteries

The low-temperature family is built for equipment that has to start and run where standard lithium packs give up. Models in the family discharge across a −40~60°C window, with per-model charge current, continuous and pulse discharge, load limit, cycle life and dimensions. The range runs to 12V, 24V, 48V, 60V, 72V and 96V classes; the two models below are the family's anchor models.

Illustration of a battery pack with snowflakes and a thermometer

Key data — Low Temperature Lithium Battery Packs (−40°C)

Voltage classes12V, 24V, 48V, 60V, 72V, 96V
Discharge window (anchor models)−40~60 °C
Cycle life (anchor models)≥1000 cycles
Cell format (72V 50Ah model)3.7V 5000mAh cells, 10P20S

What the specification has to prove

A low-temperature claim is only useful with the numbers behind it: the discharge window, the charge-temperature window (narrower, −10~45°C on the 72V model), the continuous current the pack holds at temperature, and the cycle life. The models in this family carry all four, so a buyer can check a vehicle, instrument or field device against the table directly.

Models in this family

Further classes in the family include 72V 20Ah / 30Ah / 35Ah / 40Ah and 60V 20Ah / 30Ah / 35Ah / 40Ah / 50Ah variants; those figures are confirmed on enquiry against the model.

Selecting inside the low-temperature family

Selection runs on three axes. Voltage class first: the equipment's bus (12V through 96V classes) fixes the series count. Energy second: the anchor models stand at 1.5kWh (60V 25Ah) and 3.6kWh (72V 50Ah), and the intermediate classes fill between them on enquiry. Duty third: continuous current and pulse against the load profile, checked at the working temperature — never at room temperature. A buyer who sends those three answers gets a model; a buyer who sends only a temperature gets a conversation about the other two.

Related pages