English

Home › Custom Lithium Battery Packs

Custom builds

Custom Lithium Battery Packs

Custom packs are built on the catalogue's own platforms: 3.2V LiFePO4 cells and 26650 formats, the 3.7V parallel cell module, pouch polymer cells, BMS options from protection boards to CAN/RS-485 systems with SOC reporting, and a charger line specified to match. The company works as a custom manufacturer with ODM services available, and OEM/ODM is welcomed on the polymer models. A custom enquiry starts from those building blocks, not from a blank sheet.

Illustration of a battery pack being measured with a ruler

Key data — Custom Lithium Battery Packs

ElectricalNominal voltage, capacity, continuous and peak discharge, charge current and limit
MechanicalEnvelope, weight limit, case preference (PVC shrink, sheet metal, iron case, moulded), connector
EnvironmentOperating temperature — including sub-zero duty, where the low-temperature family applies
IntegrationCommunication (RS-485 / CAN / RS232 / Bluetooth), SOC reporting, matched charger class

The ends of the catalogue's ranges

The catalogue's models mark the ends of the ranges a custom build is quoted against: discharge windows to −40°C, systems to 48V 450Ah and 12kW, storage paralleling to 16 units, and cycle ratings from 500 (the polymer models) through 800 (the two-wheeler series) to 6000+ (the storage unit at 90% depth). Custom figures are quoted against the nearest platform model.

How a custom build is specified, step by step

Step one is the load, not the battery: continuous current, peak current and their durations, from the equipment's motor, heater or transmitter profile. Step two is energy: watt-hours per shift or per cycle of use, which with step one fixes the voltage class and capacity range. Step three is the envelope — the battery box dimensions, mounting orientation and weight budget — checked against the platform's formats (blue PVC heat-shrink on the 72V low-temperature pack, black baked-paint sheet metal on the AGV battery, 3mm sheet metal on the 450Ah system, iron cases in the two-wheeler series, a carry case on the portable 80Ah unit). Step four is environment: operating temperature first (sub-zero duty routes the build to the low-temperature family's cells and ratings), then storage temperature and charge-point temperature. Step five is integration: communication protocol, connector type and current rating, and the charger class. A custom enquiry that arrives with those five answers is quoted against a named platform model; one that arrives with a capacity and a hope is quoted after a conversation — both routes work, the first is faster.

Quoted against the nearest model

Custom figures are quoted against the nearest model. The catalogue's own models mark the ends of the ranges a custom build is quoted against: discharge at −40°C (the low-temperature family), 250A continuous and 12kW load (the 450Ah forklift system), 6000+ cycles at 90% depth (the storage unit), sixteen-unit parallel operation (the storage unit), a 450A peak (the 12.8V power battery), SOC reporting at ≤5% (the 48V 250Ah system) and RS-485 host integration with software and protocol (the AGV battery). Requests inside those ends are engineering selections; requests outside them — higher current, deeper cold, longer life — are development projects and are answered as such, with the nearest model's figure as the reference point rather than a promise.

Two habits that keep a custom programme short

The five answers — load, energy, envelope, environment, integration — are quoted against the nearest platform model, with every deviation from that model named in the specification. Two habits keep that conversation short. First, send the equipment's real load profile rather than its nameplate maximum — oversizing costs weight and money on every unit forever. Second, freeze the connector and communication choices in the first specification, because both are cheap to choose early and expensive to change after tooling. Buyers with a certification destination for the finished equipment should name it in the first message. The company's published certification scope names ISO systems and product test standards including IEC 62133 and UN38.3 — the starting point of that conversation — and model-level documentation is arranged per project.

Worked example: from a load profile to a platform anchor

Take a cleaning-machine builder: load profile 800W continuous, 1,600W peak on brush start; two hours per charge cycle of use; envelope 400×300×120mm; indoor duty; CAN reporting to the machine controller. The specification sequence runs: energy 1.6kWh per cycle; the 48V class gives about 33Ah at that energy; continuous current about 17A, peak about 33A. Platform anchor: the AGV family's 48V builds (the 40Ah LiFePO4 model exceeds the energy and current requirement — 1.92kWh against the cycle's 1.6kWh, 40A continuous against about 17A — and its BMS already speaks to a host: RS-485 with host software and protocol) — the custom build is then an adaptation of an existing platform in three named respects: the envelope is reshaped to the machine's box, the connector is set to the machine's harness, and the reporting tier is built from the platform's RS-485 up to the CAN reporting the controller requires; adaptation work on an existing platform, not a research project. Enquiry questions for a first message are the five specification answers themselves.

Starting points: the family's shapes

A custom conversation goes faster when it starts from a standard shape, and the catalogue offers one per family. The module route starts from the 3.7V 18Ah parallel block for builders combining capacity to order. The polymer route starts from two packs — the 14.8V 10Ah, with its protection thresholds of 16.8V over-charge and 12.0V over-discharge, and the 12V 100Ah — and each carries a 500-cycle rating. The industrial route starts from the AGV and forklift systems, whose communication tiers (RS-485 with host software, CAN with protocol, CAN for PLC reading at ≤5% SOC accuracy) mark the integration levels a custom industrial pack can be specified to. The low-temperature route starts from the two low-temperature vehicle packs and their −40°C discharge window. And the storage route starts from the 51.2V wall unit's discipline — range, charge pair, parallel ceiling. Name the nearest starting point in the enquiry; the custom specification is then a delta from an existing product, which is a shorter and safer brief than a specification written from a blank page.

The enquiry that gets quoted first

Custom packs are quoted in the order the enquiries can be worked, and the workable ones share a shape: the electrical brief (voltage class, capacity, continuous and peak current, charge current and ceiling), the physical brief (envelope, mass budget, mounting, connector), the environment brief (working and charging temperatures, sealing), the communication brief (none, RS-485, CAN, or a host conversation), and the programme brief (quantities, market, certification documents needed, duty calendar). Five short paragraphs. Enquiries missing the environment brief are the ones that stall, because temperature is the specification that cannot be retrofitted into a finished design.

Related pages