Home › Family › 12V 100Ah LiFePO4 Battery
LiFePO4 power family — range page
12V 100Ah LiFePO4 Battery
100Ah is the most-requested capacity point in the 12V LiFePO4 range, which runs 90Ah, 100Ah, 120Ah, 150Ah, 200Ah and 250Ah models. For a full model-level specification table, see the family's anchor model, the 12.8V 200Ah battery.
Key data — 12V 100Ah LiFePO4 Battery Range
| Range position | 12V class, capacities 90–250Ah |
|---|---|
| Anchor | 12.8V 200Ah (see model page) |
| Family discharge window | −20~60 °C (anchor model) |
Specifying a 12V 100Ah enquiry
Three figures decide the build: continuous discharge current, whether the pack needs communication (the anchor model offers Bluetooth and RS-485 options), and whether units will be paralleled or series-connected (the anchor model supports up to 8 in series). Send those with the application — RV, backup, vehicle or storage — and the enquiry is matched against the range.
The 100Ah point in service
A 12V 100Ah LiFePO4 battery stores about 1.28kWh — the classic single-battery RV and backup size. In service terms: a 500W inverter load for about two hours at full depth, a 100W lighting and electronics load overnight. Buyers stepping up from lead-acid should note the usable-capacity difference: a 100Ah lead-acid bank delivers roughly half its nameplate in routine service, while the LiFePO4 anchor carries a 3000+ cycle figure — the family's reference point for cycle expectations.
Specifying the 100Ah enquiry
Three facts decide the configuration: the continuous discharge the application draws (which separates this capacity point from the 200Ah anchor's 200A service), whether monitoring is wanted (the anchor's Bluetooth and RS-485 options mark the family's pattern), and the installation's series or parallel intent. Send them with the application and the answer comes back as a configuration against the range — capacity point, options and charger class from the 14.6V line — rather than as a generic 12V quote.