Home › Family › 3.2V LiFePO4 Cells
LiFePO4 power family — cells
3.2V LiFePO4 Cells
The storage and power ranges are built on 3.2V lithium iron phosphate cells. The anchor is the 3.2V 100Ah cell format used in the wall-mounted storage unit, where sixteen cells in series (16S1P) form the 51.2V 100Ah system.
Key data — 3.2V LiFePO4 Cells
| Cell voltage | 3.2V nominal |
|---|---|
| Anchor format | 3.2V 100Ah (16S1P in the 51.2V 100Ah storage unit) |
| Also in the range | 26650 3.2V 3300mAh cells in AGV / forklift systems |
Cells in context
Cell-level supply is specified against the assemblies it feeds: the 16S1P arrangement in the storage unit, and the 26650 3.2V 3300mAh cells used in the AGV and forklift systems (15S13P and 16S135P arrangements). State the target pack voltage and arrangement with any cell enquiry.
Cells, modules and finished packs: choosing the supply level
Three supply levels suit three different buyers. Cells suit pack assemblers with their own BMS, housing and test capability — the cell is a component with a datasheet, and the pack's safety case belongs to the assembler. Modules (the ternary family's parallel units) suit buyers who need capacity blocks inside their own enclosures. Finished packs suit everyone else. The price difference between levels is the engineering the buyer does or does not have to do; the honest comparison includes the BMS, the enclosure, the test time and the certification file, not just the cell invoice.
Handling and matching at cell level
Prismatic LiFePO4 cells ship and store at partial charge, want their terminals protected against short circuit in handling, and — the point assemblers actually test — should be capacity- and resistance-matched within a series string, because the string's usable capacity is its weakest cell's. State the target arrangement (the storage unit's 16S1P is the catalogue's worked example) and the matching tolerance the build requires when enquiring.