Home › Family › 12V 80Ah Portable Battery Pack
Portable power range — model page
12V 80Ah Portable Battery Pack
The largest model of the portable N-series: a 12V 80Ah lithium pack in carry format, with a 4-level charge indicator, a switch, an aviation plug and binding posts, and a carry handle. It discharges at ≤40A continuous with a ≤120A pulse, and comes with a matched 12.6V 8A charger.
Key data — 12V 80Ah Portable Lithium Battery Pack
| Nominal voltage / capacity | 12V / 80Ah |
|---|---|
| Working range | 12.6–9.0V |
| Charge current | ≤10A |
| Discharge | ≤40A continuous / ≤120A pulse |
| Cycle life | 500+ cycles |
| Features | 4-level charge indicator; switch; aviation plug + binding posts; carry handle |
| Dimensions / weight | 92×230×300mm / 6.6kg |
| Warranty | 12 months |
| Matched charger | 12.6V 8A unit |
12V 80Ah ratings in full
Charge current is ≤10A. Discharge is ≤40A continuous and ≤120A pulse across a 12.6–9.0V working range. Cycle life is 500+ cycles. The unit measures 92×230×300mm and weighs 6.6kg.
The 12V 80Ah portable specification
Nominal energy is about 960Wh in a 6.6kg carry unit — the largest capacity point of the portable N-series, whose range runs from 12V 40Ah to this 80Ah model across the N1 to N4 lines. The discharge pair (≤40A continuous, ≤120A pulse) is a field-power profile: instruments, lighting and test equipment sustained all day, with the pulse absorbing motor and inrush peaks at three times the continuous rate. The feature set is what makes it a portable product rather than a bare pack: a 4-level charge indicator so the state of the unit is readable without instruments, a switch, two connection routes (an aviation plug for a positive lock and binding posts for direct leads), and a carry handle. The working range, 12.6–9.0V, states the window the connected equipment must operate inside, from full charge to cutoff.
The matched 12.6V 8A charger
The charger supplied with this model takes AC 100–240V input and delivers DC 12.6V at 8A in CC/CV, with a standard charge time of 11–13 hours. Read the pairing against the battery's own limits: 12.6V is the top of the pack's working range, and 8A sits under its ≤10A charge ceiling, so the matched unit charges at a routine overnight rate by design. The standalone charger catalogue's 12.6V 8A plastic-shell unit is a different model in a different line; the charger matched to this battery is the 12.6V 8A unit supplied with it. Fleets running the pack daily should size charger count from the 11–13 hour standard charge and the rotation pattern, the same discipline as any fleet battery.
Where the 12V 80Ah portable pack fits
Portable 12V power serves the work that happens away from sockets: field instruments, survey and test setups, emergency and event lighting, and backup duty that has to be carried to the load rather than wired to it. At 6.6kg this model is a one-person carry for a full working day of instrument power; the smaller N-series points (40Ah to 75Ah) sit in the same portable format at lower capacities, and the fixed 12V families take over where the installation stops moving. The warranty period for the model is 12 months. Enquiry questions: the load's continuous and peak draw against the ≤40A / ≤120A lines, the connector route the equipment uses (aviation plug or binding posts), and charger count for the rotation.
The matched charger, read properly
The pack's matched charger is a 12.6V 8A unit — a pairing supplied with the battery, distinct from the standalone 12.6V 8A plastic-shell charger in the charger line, a separate product that happens to share the voltage and current figures. The distinction matters at ordering: the matched unit is specified against this pack, so the pairing question is already answered; a standalone charger is selected against the battery's ceiling at enquiry. At 8A, a spent 80Ah pack refills in roughly ten hours of bulk charging — an overnight rhythm for a pack that works days, which is the portable duty pattern: long discharge, unhurried recharge, no opportunity-charging infrastructure. Buyers whose duty is tighter should say so; the 12V charger class runs to 20A in aluminium and 40A on the LiFePO4-designated models, and the pairing is re-specified against the pack's limits, not assumed.
A day of portable duty, in numbers
The pack stores about 0.96kWh. A camp or cabin load of 40W — lights, a fan, device charging — runs about a day. A 100W load — a small fridge's average, a television, a CPAP machine — runs nine to ten hours. A 300W load runs about three. The portable case format is what makes those numbers usable away from a wall: the battery travels as luggage, works where it lands, and returns to its charger at night. Against the family's larger N-series points (to 80Ah, the ceiling this model sits at), the selection question is purely the day budget: add the loads, multiply by the hours, divide by 0.96kWh, and the answer is one pack, one pack plus a spare, or a fixed installation wearing a portable costume. The enquiry that arrives with the load list gets the division done and checked.
Request a quote
Send the model or your target specification — voltage, capacity, discharge current and envelope.