Home › Family › 12V Lithium Battery Chargers
Charger family — 12V class
12V Lithium Battery Chargers
Ten models split by ceiling: 12.6V units for 12V ternary packs, and 14.6V units for the 12V LiFePO4 side. Aluminium shells carry the class from 5A to 40A; plastic shells cover 1A to 8A for smaller packs.
Key data — 12V Lithium Battery Chargers
| Shell | Aluminium (five models); plastic (five models) |
|---|---|
| Outputs | 12.6V (1A–20A) and 14.6V (2A, 25A, 40A) |
| Series fields (aluminium) | 220Vac input in selected models; ≥85% efficiency; red/green LED; 1.5m input cord, 1.0m output cord |
The 12V class models
| 12.6V 5A — aluminium | 12.6V±0.2; 5A±5%; 63W; 120×90×50mm; 0.7kg |
|---|---|
| 12.6V 10A — aluminium | 12.6V±0.2; 10A±10%; 126W; 170×90×50mm; 1kg |
| 12.6V 20A — aluminium | 12.6V±0.2; 20A±10%; 252W; 170×90×63mm; 1.2kg |
| 14.6V 25A — aluminium | 14.6V±0.2; 25A±10%; 365W; 220×120×70mm; 2.5kg |
| 14.6V 40A — aluminium | 14.6V±0.2; 40A±10%; 584W; 230×135×70mm; 3.0kg |
| 12.6V 1A — plastic | 12.6V±0.2; 1A±10%; 12.6W; 78×47×30mm; 70g |
| 12.6V 2A — plastic | 12.6V±0.2; 2A±10%; 25.2W; 95×45×30mm; 135g |
| 12.6V 5A — plastic | 12.6V±0.2; 5A±10%; 63W; 142×61×32mm; 280g |
| 12.6V 8A — plastic | 12.6V±0.2; 8A±10%; 100.8W; 172×73×35mm; 470g |
| 14.6V 2A — plastic | 14.6V±0.2; 2A±10%; 29.2W; 95×45×30mm; 135g |
Reading the 12V class table
The ceiling split is the class's organising fact: ternary 12V packs charge to 12.6V, LiFePO4 12V packs to 14.6V, and a charger from the wrong side of the split undercharges or overcharges by design. By current: the plastic 12.6V 1A and 2A units serve small instrument and portable packs; the aluminium 12.6V 5A, 10A and 20A units serve vehicle and bank charging at rising turnaround rates. On the LiFePO4 side, the 14.6V 25A (365W) and 40A (584W) aluminium models exist for bank duty above all: the 12.8V 200Ah battery carries a 100A standard / 200A maximum charge, so the 40A unit is a roughly five-hour charge for that battery and the 25A an eight-hour one — moderate rates against the battery's own ceiling, chosen for depot routine rather than for speed. The plastic 14.6V 2A is the maintenance-rate unit for small LiFePO4 packs. Worked examples from the class: a 12V 20Ah ternary pack on the plastic 12.6V 2A is about a ten-hour charge; on the aluminium 10A, about two; a 50Ah pack on the aluminium 20A, about two and a half. For the portable range: the 12V 80Ah portable battery's matched charger is its own 12.6V 8A unit (AC 100–240V input, CC/CV, 11–13 hour standard charge), supplied with the battery; the standalone 12.6V 8A plastic unit in the table above is a different model in this line, and the two should not be conflated.
Specifying a 12V charger enquiry
State the pack's ceiling (12.6V or 14.6V), its capacity and its charge limit; the shell and current follow. Distributed fleets buying in multiples should state the count and the charge-point layout: at the small end of this class the units are 70g to 470g plastic shells that sit at the point of use, while the aluminium 25A and 40A units are depot equipment with depot circuits. Efficiency across the aluminium series is 85% or better, with red/green indication and 1.5m / 1.0m cords.
Which batteries these ceilings serve
The 12.6V models serve 3S lithium packs — the class of the shop's 10.8V/11.1V 10.5Ah pack, whose charge ceiling is 12.6V — with currents from the 1A and 2A plastic units for overnight and bench duty to the 5A, 10A and 20A aluminium rungs for larger packs. The 14.6V models serve 4S LiFePO4 — the class of the 12.8V 200Ah battery, whose working range tops at exactly 14.6V; the 25A and 40A aluminium models designated for LiFePO4 are that battery's fast-charge conversation, against its 100A standard / 200A maximum charge pair, while the plastic 14.6V 2A model is its maintenance rung. The standalone plastic 12.6V 8A model is its own product — not the matched charger supplied with the 12V 80Ah portable pack, which is a separate unit supplied with that battery. Ceiling first, battery second, current third: the ten models on this page sort by that order alone.
Current rungs and turnaround
Turnaround is current divided into capacity, and this class spans the full range of answers. An 80Ah portable pack on the 8A standalone rung: about ten hours — overnight, which suits the duty. A 200Ah LiFePO4 battery on the 40A rung: about five hours of bulk charging, against about eight on the 25A. The selection discipline is to buy the rung the duty's window needs and no more: oversized current spends money to save hours nobody is waiting for, and every rung must still sit under the battery's own charge limit — the battery's figure governs, the charger's figure serves. Enquiries that state the pack, its limit and the turnaround window get a single-model answer.
Two shells, two duties
The class is split by shell for a reason. The aluminium models are the depot and workshop line: finned cases that shed heat at sustained ratings, the series' shared ≥85% efficiency, IEC socket, red/green indication, 1.5 m in and 1.0 m out. The plastic models are the light-duty line, sized for benches, service kits and device programmes where the charger ships with the product. Neither line is the better one; they answer different installations. A buyer standardising should standardise within one shell per site — the cords, sockets and spares then interchange — and mix shells only where a site genuinely runs both duties.
Documentation and spares
A 12V-class programme should close three documentation items at order: the model's rated wattage and efficiency for the depot or product file; the ceiling printed for the specific unit, checked against the battery's own ceiling (12.6V for the 3S packs, 14.6V for the LiFePO4 battery); and the claimed certification documents for any model being shipped inside a product, requested as documents rather than repeated as claims. The spare logic of the class is forgiving — the plastic rungs are inexpensive enough to hold as shelf spares, and the aluminium rungs share one input socket, cord set and two-LED indication across the series — but both depend on the order naming models by their figures, so the spare that arrives is the model that was meant.