Home › Family › Warehouse Robot Batteries
AGV family — application page
Warehouse Robot Batteries
Intelligent mobile robots and AGV warehouse logistics vehicles are named application fields in the company's own profile, and the AGV family powers them: a 48V 40Ah LiFePO4 model with RS-485 host reporting for managed fleets, and a 24V 60Ah model with a −40°C discharge rating for cold-storage automation.
The warehouse-robot application
The company's profile names its application fields directly: AGV intelligent warehouse logistics handling vehicles and intelligent mobile robots sit in the same list as low-speed electric vehicles, electric forklifts and electric stackers. The AGV family itself is built around that duty — 24V and 48V packs for AGV and full-electric handling vehicles, rack shuttles and cold-chain vehicles — and the parallel cell module's applications name robots and AGV explicitly, which makes the module the building block for robot builders assembling their own pack around a defined cell unit.
The anchor batteries behind the application
Two anchor models stand behind the application. The 48V 40Ah AGV battery: LiFePO4, 40A continuous and 120A pulse, RS-485 with host-computer software and protocol, 3000+ cycles, a 54.0V 18A matched charger — the fleet default for warehouse robots that cycle daily and report to a host. The 24V 60Ah cold-storage battery: 40A continuous and 120A pulse, discharge −40~60°C and charge −20~45°C, RS-485, ≥1000 cycles, a 29.4V 20A matched charger — the specialist for refrigerated warehouses and cold-chain shuttles. Between them they cover the warehouse-robot duty split that matters: temperate fleets optimise for cycle life and reporting; cold fleets optimise for the temperature windows and budget the rotation pool accordingly.
Specifying a warehouse-robot enquiry
State the vehicle's voltage class (24V or 48V), its average and peak draw, the route's energy per shift, the working temperature range, and the host interface the fleet software reads. Against those five facts one of the two anchor models is selected, the charger count follows from the matched chargers and the rotation pattern, and any gap between the vehicle's envelope and the case dimensions (165×265×425mm for the 48V model, 120×310×330mm for the 24V) is named in the reply rather than discovered at installation.
The documents behind the application
The application rests on one anchor model, and the integrator's checklist is its figures: 48V class, 40Ah, 1.92kWh; 40A continuous and 120A pulse discharge; 1.8kW maximum output; RS-485 with host-computer software and protocol; a 54.0–37.5V working range; a matched 54.0V 18A charger supplied with the battery; 3000-plus cycles; a 12-month warranty; and a case of 165×265×425mm at about 25kg. A warehouse-robot programme that can tick its requirements against that list has found its battery; one that cannot should bring the unticked lines to the enquiry, because they define the custom conversation precisely.
Request a quote
Send the model or your target specification — voltage, capacity, discharge current and envelope.