English

Home › Family › 51.2V 200Ah Wall-Mounted Storage Battery

Energy storage family — range page

51.2V 200Ah Wall-Mounted Storage Battery

The wall-mounted format also runs to 51.2V 200Ah. The anchor model in the format is the 51.2V 100Ah unit — 6000+ cycles, RS485 / CAN / RS232 communication, parallel connection to sixteen units; figures for the 200Ah unit are confirmed on enquiry.

Illustration of a wall-mounted battery unit with a display screen

Key data — 51.2V 200Ah Wall-Mounted Storage Battery

FormatWall-mounted, 51.2V platform
Anchor sibling51.2V 100Ah (see model page)

Choosing between 100Ah and 200Ah

Both units share the 51.2V platform and wall format. The 100Ah unit is the anchor route — 5.12kWh per unit, up to 16 in parallel, ≥6000 cycles at 90% DOD. The 200Ah point halves the unit count for the same energy; send the target capacity and inverter model with the enquiry and the comparison can be made on the data.

When the 200Ah point is the right format choice

Wall positions are the scarce resource in many installations: garages with one suitable wall, plant rooms shared with other services. The 200Ah point answers with energy density per mounting position — nominally 10.24kWh where the 100Ah unit gives 5.12kWh. The counterweight is handling and service: a larger unit is a heavier lift and a bigger single point of failure, and the anchor remains the 100Ah unit, with its cycle, communication and parallel data. The enquiry should state the wall constraint explicitly; it is a legitimate deciding fact, not an afterthought.

Pairing the 200Ah unit with an inverter

The platform facts the inverter must match are the 51.2V nominal and the family's communication pattern (RS485, CAN and RS232 on the anchor unit). Inverter sizing runs from the loads, battery sizing from the energy; the two meet at the current ceiling. Send the inverter model and the load list with the enquiry and the pairing is verified against the platform data before quotation.

Related pages