English

Home › Heated Clothing Batteries

Heated-clothing range

Heated Clothing Batteries

The heated-clothing range runs to two items. Its battery is a temperature-controlled polymer battery for heated gloves, rated 3.7V and 3000mAh; a related accessory is a temperature-control switch for heated clothing, rated at a maximum load current of 3.5A across 3.7V–14.8V. Both are quoted against the garment programme — run-time and heat settings — rather than as standalone parts.

Illustration of a gloved hand

Key data — Heated Clothing Batteries

Battery3.7V 3000mAh, temperature-controlled polymer
Switch accessoryMax 3.5A, 3.7V–14.8V

The range

Glove battery3.7V 3000mAh temperature-controlled polymer battery
Control switch (accessory)Max load 3.5A; 3.7V–14.8V

Garment-side products (gloves, vests, insoles) are not part of this battery catalogue; enquiries are answered on the battery and switch data above.

Heated garments as a battery application

A heated garment is a small, body-worn power system: a low-voltage battery, a heating element and a temperature controller, worn for hours in the cold the battery itself dislikes. The glove battery — 3.7V, 3000mAh, temperature-controlled polymer — is sized to that duty: about 11Wh, enough for a shift section of glove heating at garment power levels, in a pouch format that sits flat against the body. The control switch's figures (3.5A maximum load, 3.7V–14.8V) mark the accessory's envelope across garment voltages.

Specifying a heated-clothing enquiry

Garment programmes are specified by run-time and heat, not by battery alone: state the garment type, the heating zones, the target hours per charge and the temperature settings expected. Battery and switch are quoted against that programme from the figures above; ask for the charger pairing for the battery with the enquiry.

Related pages