Home › Polymer Lithium Battery Packs
Polymer family
Polymer Lithium Battery Packs
Pouch-cell polymer packs for applications that need shaped, light batteries: monitoring and communications equipment, medical devices, lighting and instruments. The family's sidebar runs from 3.7V to 24V classes; two anchor models — a 14.8V 10Ah instrument pack and a 12V 100Ah large pack, both rated at 500 cycles.
Key data — Polymer Lithium Battery Packs
| Voltage span | 3.7V–24V classes |
|---|---|
| Anchor models | 14.8V 10Ah; 12V 100Ah |
| Applications | Monitoring, medical, lighting, instruments, communications |
Models
14.8V 10Ah polymer pack
≤3A continuous, ≤15A pulse, protection thresholds, about 930g.
12V 100Ah polymer pack
≤20A continuous, ≤65A pulse, 95×155×190mm.
Further points in the family include 18.5V 8.5Ah, 14.8V 6.6Ah, 14.8V 4100mAh and 5200mAh, 12V 5Ah / 10Ah / 20Ah, 11.1V 4500mAh and 3Ah, and 7.4V 4000mAh packs; their figures are confirmed on enquiry against the model.
Selecting inside the polymer family
The family divides by construction stage. Finished packs (the two anchor models and the mid-voltage points) suit buyers who want a battery, not a project. Single and paired cell classes (the 3.7V and 7.4V points) suit device builders whose product is the enclosure. Selection inside the finished range runs on voltage and draw profile: standby and intermittent duties are the pouch format's home ground, and any duty that is really daily deep cycling should be re-checked against the LiFePO4 family before the order — the cycle rows (500 here against 3000+ there) make the comparison in one line.
Specifying a polymer build
A polymer enquiry is a geometry message before it is an electrical one. The pouch format's freedom — thin, light, shaped to the cavity — means the specification starts with the device's internal dimensions and the pack's permitted profile, then the electrical brief: voltage class, capacity target, continuous and peak draw, and the protection thresholds those draws imply. The two anchor models: a 14.8V instrument unit with its protection voltages, and a 12V 100Ah assembled pack for kilowatt-hour-class shaped installations. Between and around them, the custom route assembles series and parallel combinations of the family's cells (the 14.8V model welcomes OEM/ODM builds). What the enquiry should never skip is the mechanical protection plan: a pouch pack's enclosure is part of the product, and the device's housing design and the pack specification are one conversation.