English

Home › Ternary (NMC) Packs & Modules

Ternary family

Ternary (NMC) Packs & Modules

The ternary family covers high-energy-density builds: a 3.7V parallel cell module and a 48V 52Ah pack, 18650 packs with built-in BMS from the shop range, and a range of packs running from 7.4V to 110V.

Illustration of cylindrical cells standing in a row

Key data — Ternary (NMC) Lithium Battery Packs & Modules

FormatsParallel cell modules; finished packs; 18650 packs with BMS
Pack spanTo 110V
Anchor entries3.7V 18Ah module; 48V 52Ah pack; two shop 18650 packs

Entries

Selecting inside the ternary family

The family's three routes: the parallel module for builders assembling their own packs for vehicles, forklifts, robots and AGV; the 48V 52Ah finished pack for backup power, storage, mining, base-station and street-light duty at the 48V bus; and the BMS-fitted 18650 packs where a finished, protected unit is wanted for a device. Around them, the family carries further points — 48V packs from 8.8Ah to 40Ah, a 48V 30Ah iron-case model, a 110V 40Ah electric-racing pack — which are confirmed against the enquiry.

When the ternary route is the right route

Ternary chemistry earns its place where the envelope or the mass budget excludes LiFePO4, where a device's electronics are built around the 3.7V-per-cell voltage curve, and where the duty's cycle count is modest enough that the family's cycle ratings (500 to 800) are a budget line rather than a constraint. The cycle figures stand as each family's own: this family's models at 500 to 800 cycles, the industrial LiFePO4 systems at 2000+ to 3000+, storage at 6000+ — and the dedicated low-temperature family publishes its own −40°C discharge windows. Specifying from this family is therefore a deliberate act with a named reason, and enquiries that state the reason (the envelope, the mass, the voltage architecture) get the specification confirmed or corrected in the first reply.

Related pages